About StarTech.com 10/100 PoE Power over Ethernet Injector 48V/30W (POEINJ100):
The POEINJ100 10/100 Mbps PoE Power over Ethernet Injector with 48V Output converts standard 90-260V/AC power into low-voltage DC power that can run over existing Cat5 (or better) network cable to power IEEE 802.3at compliant network accessories. The Power over Ethernet injector device also features PoE awareness, to verify whether the device receiving power is IEEE 802.3at compliant. If the device is not compliant, only data will be sent through the LAN cable, protecting your device from damage. By adding the POEINJ100 to your existing network setup, installing devices such as Wireless Access
Features StarTech.com 10/100 PoE Power over Ethernet Injector 48V/30W (POEINJ100):
- High powered 30W injection allows for longer cable runs that will still provide full power to your PoE devices
- Use existing standard Cat5/5e/6 Ethernet cabling to deliver both power and data, allowing for remote equipment installs in locations where it was previously impossible
- Sturdy steel construction provides durability in harsh environments
- Uses existing/standard Cat5, 5e, 6, or better cabling
- 1 Ethernet Input(data only) port compliant with IEEE 802.3 10BaseT, IEEE 802.3u 100BaseTX
- 1 PoE/PSE(Power + Data) output ports compliant with IEEE 802.3af PoE and IEEE 802.3at PoE
- 48V/DC at Full 30W Output Supported
- Steel enclosure for durability in harsh environments
morerebosnian 